Free UK mainland delivery on orders over £50*

Osmo Uv Protection Oil Clear Satin

Product Questions
In stock
Product Code:
CP410C
From £27.29 £22.74

Step 1: Select your colour:

Choose your colour

No shades found

Your chosen colour:

**Insert colour name Here**

 

-- Or --

Step 2: Select your size:

FREE DELIVERY FOR ORDERS £50 AND OVER (UK mainland - Express* Service)
£5.99 DELIVERY FOR ORDERS LESS THAN £50 (UK mainland - Express* Service)

Please note: This product has no tint options. 


Check Stock Availability In-Store
* Please select product options to see accurate availability
  • Product Type Product Type Oil Based
  • Application Method Application Method Brush, Roller
  • Coverage Coverage 1 litre covers approx. 18 m² with one coat

Osmo UV Protection Oil is a clear satin wood finish based on natural oil for wood in outdoor areas including doors, windows, window shutters, carports, timber cladding, balconies, fences, pergolas, summer houses and bamboo poles (e.g. in screens). This UV protecting wood oil works by creating a microporous surface allowing the wood to breathe and reduce swelling and shrinkage. Water-repellent, it will not crack, peel or flake either.

Used as a top coat on already colour treated wood, Osmo UV-Protection-Oil reduces the time to reapply significantly. It blocks the greying process with a UV protection factor 12 in comparison to untreated wood when two coats are applied.

We recommend a coloured base coat first such as the Osmo Natural Oil Woodstain or Osmo Country Colour.

Preparation and Application of Osmo UV Protection Oil

For best results we recommend that the wood surface is be clean, dry and frost-free (moisture content max. 20%). Osmo UV-Protection-Oil is ready to use, there is no need to thin, simply stir well with a flat stirring stick or a spatula. Clean any old stains off and remove any previous paint coatings before applying Osmo UV Protection Oil and if renovating an existing wood surface, we suggest that you degrey any already greyed areas with Osmo Wood Reviver Power Gel before applying.

Where you are building something like a summer house, we suggest that where possible, you apply the first coat to all sides before building. Fresh wood containing natural wood extractives and especially hard woods, needs to weather off (for approximately 6 weeks) after building. By this point the wood becomes absorbent and the wood finish adheres optimally.

For ease of application, we recommend that you apply with the Osmo Flat Brush or Microfibre Roller, applying thinly along the wood grain and spreading well. Allow to dry for approx. 12 hours under good ventilation. Then apply the second coat. When recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.

 

Osmo UV Protection Oil

  • Highly water and dirt resistant
  • Clear UV Protection Oil is safe for humans, plants and animals when dry
  • Microporous, penetrating finish which does not crack, peel or flake
  • No sanding necessary when topping up coating
  • Delays natural greying better than bare wood
  • Colour intensifies bare wood (wetted look)

  • C&C disabled No
  • Weight 1.000000
  • Colour-match No
  • Application Brush, Roller
  • Product Application Osmo Flat Brush or Microfibre Roller
  • Coverage 1 litre covers approx. 18 m² with one coat
  • Touch Dry 12 hours
  • Surface Exterior Wood
  • Water or Oil Based Oil Based
Customer Questions
No Questions
Did you find what you were looking for?

Free delivery for orders £50 and over (UK mainland - Express* Service) 

£5.99 delivery for orders less than £50 (UK mainland - Express* service)

Order before 12pm Monday-Thursday for Express Delivery* excluding bank holidays

*Restrictions apply.

 

 

 

Customer Reviews

x
Not sure which size?

Use our paint calculator to work out how much you need

Enter the dimensions of your walls, details of any gaps like windows and doors, and click calculate

Remember: It's probably better to have a bit too much than to order too little!

Tell us your wall dimensions
Wall 1
How many windows and doors are there in the area you want to paint?

This is based on a coverage of 10m² per litre of paint and one coat of paint.

Make sure you always check the coverage on the product page before purchasing and, if covering a dark or bright colour, you may need two or three coats.