Sadolin Superdec Opaque Wood Protection Satin Sample Pot

Sadolin Superdec Satin is a water based, highly durable opaque finish wood protection for cladding and exterior joinery. A flexible coating that resists cracking, peeling and flaking, it is an easy to apply tinted coating that brings weathered or uneven surfaces back to life and adds colour to brand new surfaces. 

It is self-priming and works as an undercoat, so there’s usually no need to get a separate product. It can be applied to new and previously painted or stained surfaces. Depending on how liberal you are with the stain, you can average between 10-15 sq. m per litre. If you’re opting for one of the lighter tones, especially anything off white, it is advisable to use a blocking primer to prevent discolouration.

Applying Sadolin Superdec

Sadolin Superdec should be applied in a full flowing coat ensuring all surfaces and end grains are fully coated. For best results use a good quality brush to apply 2 coats paying special attention to end grain, tops and bottoms of doors, and undersides of sills. Allow a minimum of 16-24 hours drying between coats.

Sadolin Superdec Overview

• Easy to apply
• Flexible coating that resists cracks, peeling and flaking
• Adds opaque colour to any exterior wooden cladding or joinery excluding decking
• Touch dry in just 1 hour

Please note: This colour paint is mixed to order and cannot be refunded or exchanged

If you require a RAL colour can you, please put the prefix RAL in with the colour code.