TX10 is a highly effective non Methylene Chloride formulation, which is non flammable and is biodegradable. As the product is water based, there is minimal evaporation. It clings 100% to vertical surfaces, hence no drips, runs or waste. It is suitable for use both indoors and out, by serious professionals and novice DIYers.
A generous coating is applied by brush to the surface to be stripped and left for approximately 30 minutes. For areas where there are more than five layers, a second coat maybe be necessary. Once TX10 has penetrated to the substrate, it can be scraped off leaving the surface clean. The stripped area can then be rubbed down using sandpaper, steel wool or a scrubbing brush.
TX10 complies with Decision No 455/2009/EC Of The European Parliament And Of The Council Of 6th May 2009 Amending Council Directive 76/769/EEC, which has outlawed the sale of Methylene Chloride Paint Strippers from sale to the general public.
Use our paint calculator to work out how much you need
Enter the dimensions of your walls, details of any gaps like windows and doors, and click calculate
Remember: It's probably better to have a bit too much than to order too little!
This is based on a coverage of 10m² per litre of paint and one coat of paint.
Make sure you always check the coverage on the product page before purchasing and, if covering a dark or bright colour, you may need two or three coats.