Free UK mainland delivery on orders over £50*

Zinsser Allcoat Exterior Water Based Gloss Black

Product Questions
In stock
Product Code:
CPZN7230003D1
From £18.61 £15.51

Step 1: Select your colour:

Choose your colour

Select colour chart:

- or -

Sorry, no results found!

Please note: Due to differences in computer monitors, actual colours may vary from those shown. These colours are only intended as a guide and it is your own responsibility to ensure you have picked the correct colour. Any paint mixed by us cannot be returned.

Your chosen colour:

**Insert colour name Here**

 

-- Or --

Step 2: Select your size:

FREE DELIVERY FOR ORDERS £50 AND OVER (UK mainland - Next Working Day* Service)
£5.99 DELIVERY FOR ORDERS LESS THAN £50 (UK mainland - Next Working Day* Service)

Please note: This product has no tint options. 


Check Stock Availability In-Store
* Please select product options to see accurate availability
  • Durability Durability Long Life Cycle
  • Product Type Product Type Water Based
  • Recoat Time Recoat Time 1 hour
  • Application Method Application Method Brush, Roller, Sprayer
  • Coverage Coverage 12m2 per Litre

Zinsser Allcoat Exterior Gloss is a high performance exterior gloss paint suitable for all outside wood, metal, masonry, plastic, concrete and cladding. It forms a breathable, low maintenance, water-shedding coating that is touch dry in 30 minutes and recoatable in 1 hour. A mould resistant gloss paint that offers supreme protection to all exterior surfaces, it also contains a biocide to protect the dried surface against fungal degradation.

Zinsser Allcoat Exterior Gloss provides excellent resistance against cracking, blistering and flaking. The tough finish is resistant to rain and severe weather and offers excellent colour retention. It can even be applied to previously painted surfaces without sanding, over glossy paints or surfaces coated with bitumen, tar varnish or creosote.

Also available in white and a wide range of tinted colours.

Preparation and Application

Allcoat couldn’t be easier to apply, simply remove any existing mould or mildew and apply two coats with a brush, roller or spray. No need to prime, Zinsser Allcoat is self-priming on most surfaces. The first coat primes and seals the surface, providing a base for the top coat. The top coat completes the sealing process while providing additional moisture resistance and protection.

If you are painting bare ferrous metal, prime with Zinsser Coverstain and abrade and degrease unweathered powder coatings before painting.

Zinsser Allcoat Exterior Water Based Gloss Overview

  • Low VOC gloss paint
  • Self priming 
  • Extremely durable and weather resistant
  • Up to 15 year performance
  • Can be used on almost all exterior surfaces
  • C&C disabled No
  • Weight 1.000000
  • Colour-match No
  • Select Colour Black
  • Application Brush, Roller, Sprayer
  • Product Application Brush, Roller & Airless Spray
  • Coverage 12m2 per Litre
  • Touch Dry 30 minutes
  • Recoatable 1 hour
  • Number of Coats 2
  • QTY in Pack 1 Pack
  • Surface Exterior Walls, Exterior Wood, Metal
  • Water or Oil Based Water Based
Customer Questions
Can Zinsser Allcoat be used for leadwork/flashing at the front of house where bay window is, whereby the tiles are situation in the middle. The leadwork/flashing has previously been painted black over 7 years ago and now the black in some places has come off.

Zinsser Allcoat is suitable for lead flashing. We recommend applying Zinsser BIN primer to spot prime the areas where the paint is missing. 

Could this be used to paint a camper van pop top roof? I think it’s fibreglass.
We would need to know for sure what the surface was made from to make a recommendation but if you can call us on 03333 202 369 our team can find out more and offer more detailed advice.
can i paint over sandex advanced gloss without sanding it down .also can i paint onto bare wood
No, To apply the Zinsser Allcoat Exterior Water Based Gloss you would have to apply a gentle sand to create a key for the paint.
Do plastic drainpipes accept all coats gloss exterior

Yes, you can use Zinsser Allcoat Exterior Waterbased Gloss on plastic drain pipes, however we do advise using Zinsser Bulls Eye 123 Primer before applying.

Can you paint directly on to an external metal toilet waste pipe with this product and do you need to sand and prime first? Thank you
We would advise you to sand first and test a part of the pipe with the Zinsser to make sure the paint adheres to the metal or a primer maybe needed such as Zinsser bullseye 123.
Did you find what you were looking for?

Free delivery for orders £50 and over (UK mainland - Next Working Day* Service) 

£5.99 delivery for orders less than £50 (UK mainland - Next Working Day* service)

Order before 1pm Monday-Thursday for Next Working Day Delivery* excluding bank holidays

*Restrictions apply.

 

 

 

Customer Reviews

x
Not sure which size?

Use our paint calculator to work out how much you need

Enter the dimensions of your walls, details of any gaps like windows and doors, and click calculate

Remember: It's probably better to have a bit too much than to order too little!

Tell us your wall dimensions
Wall 1
How many windows and doors are there in the area you want to paint?

This is based on a coverage of 10m² per litre of paint and one coat of paint.

Make sure you always check the coverage on the product page before purchasing and, if covering a dark or bright colour, you may need two or three coats.