Zinsser Allcoat Exterior Water Based Satin Ral 7016 Anthracite Grey
Check Stock Availability In-Store
Zinsser Allcoat Exterior Satin Water Based Paint RAL 7016 Anthracite Grey is a high-performing mould-resistant paint for exterior surfaces including wood, metal, masonry, cladding, plastic, and concrete. It can even be applied to previously painted surfaces without sanding, over glossy paints or those coated with bitumen, tar varnish or creosote. A highly durable paint thanks to its breathable, water-shedding coating rich in biocides to protect against fungal degradation, it has an expected life span of up to 15 years.
Offering high levels of resistance against cracking, blistering, and flaking, it creates a tough coating that will withstand the toughest of weather conditions keeping its depth of colour and tough finish.
If you’re looking to freshen up exterior surfaces, you can’t go wrong with Zinsser Allcoat Exterior. A perfect garage door paint or front door paint, it is available in hundreds of tinted colours and classic black.
Preparation and Application
For best results, remove any existing mould or mildew and apply two coats using a brush, roller or spray. There is no need to prime before applying Allcoat as it is a self-priming paint on most surfaces. The first coat primes and seals the surface, providing a base for the top coat. The top coat completes the sealing process while providing additional moisture resistance and protection.
A quick and easy to apply exterior paint, it is touch dry after just half an hour and is ready for a recoat after one full hour.
If you are painting bare ferrous metal, prime with Zinsser Coverstain and abrade and degrease unweathered powder coatings before painting.
Allcoat Exterior Satin Water Based Overview
- Mould resistant exterior coating
- Highly durable and low maintenance
- Life expectancy of up to 15 years
- Self priming
- Fast drying
- Low VOC
- C&C disabled No
- Weight 1.000000
- Colour-match No
- Select Colour Anthracite Grey
- Application Brush, Roller, Sprayer
- Product Application Brush, roller or spray
- Coverage 12m2 Per Litre
- Touch Dry 1 Hour
- Recoatable 1 Hour
- Thinning Water
- Number of Coats 2
- QTY in Pack 1 Pack
- Surface Exterior Walls, Exterior Wood, Metal
- Water or Oil Water Based
We wouldn't recommend using Allcoat on a floor as it isn't designed for footfall but we recommend using one of our specialist floor paints which can be found here.
We wouldn't recommend using Zinsser Allcoat Exterior Water-Based Satin on a narrowboat. We recommend Tikkurila Unica Super 90 or another marine-quality paint.
We recommend washing the surface with methylated spirits and allowing it to air dry fully, before applying a knotting solution followed by the Zinsser Allcoat.
The Zinsser Allcoat Exterior Water Based Satin is not suitable for a Felt Roof. We would recommend a Bartoline Black Bitumen Paints.
Free delivery for orders £50 and over (UK mainland - Express Next Day* Service)
£5.99 delivery for orders less than £50 (UK mainland - Express Next Day* service)
Order before 12pm Monday-Thursday for Next Day Delivery excluding bank holidays